Fmuser TV-5W UHF VHF TV Transmitter portable small power


Sample/Wholesale
Price
Shipping
Carrier
Buy it Now
1 pcs sample
1132 USD
/pcs
238 USD
DHL/UPS 7-10days

pcs
USD
/pcs
USD
Airmail 25days


5W transmitter 5w tv transmitter

General Description:
This transmitter makes use of RF modulation technology and imported power amplifier, featuring simple circuit design, good performance, stable operation and long time continuously running. It can make up a medium-power TV station when connected with the microwave equipment, satellite TV receiving equipment and video recording equipment.

The complete kit contains:
1. 5W TV Transmitter
3. Video input cable
4. Audio input cable
5. Power supply cord
6. Operation instructions

Operation Principle:

The 5W TV transmitter is composed of three parts, a modulation unit, a power amplifier (PA) unit and a switching power supply. In the modulation unit, video signals are adjusted to the suitable modulation depth via a level adjusting potentiometer and then clamped by a diode.
The audio signals are sent to a FM oscillator for frequency modulating after its frequency deviation is adjusted by the level potentiometer.
The FM oscillator employs a LC oscillator and generates6.5MHz FM signal by a variable capacitance diode.
The frequency of the crystal oscillator is multiplied to generate the wanted visual carrier. 6.5MHz FM signal and video signal modulate the visual carrier simultaneously.
A bandpass filter will filter out unwanted components and the signals will be sent to the PA unit by a broadband amplifier.
PA unit is composed of first stage PA and final stage PA units. The first stage PA unit consists of a module and a transistor and adopts a class-A broadband amplifier.
The gain of the module is 34dB and the total gain of the PA is about 54dB.
Working current of the triode transistor can be calculated by measuring voltages on both ends of the resistor R6 (2W 1W).
The power supply unit contains a switching power supply which features small size, lighter weight and high efficiency and can provide over-current and short-circuit protections, so that the transmitter will work at a stable 28V DC voltage.
The overall equipment uses one 28V/10A power supplies. In the case of one of the power supplies is out of order, the transmitter will be switched off into safety mode automatically.

Specifications:

General
Dimensions:120mm*400mm*420
Temperature range:0- 40`C
Relative humidity:90% (at 25`C)
Voltage:220VAC  / 50-60Hz  (please let us know your voltage and frequency , we can custom make for you )
Power consumption:70W
Operating channel: any appointed channel within UHF or VHF

Modulation method
Vision: negative polarity, AM
Sound: FM

TV standard
NTSC  ( Pleast let us know the standard you need , we can custom make for you )
Vision/sound power ratio : 10:1
Output power :5W
Output impedance:50Ohm
Unwanted radiation:in adjacent channel   -50dB
Intermodulation distortion:in- band  -50dB

Video characteristics
Video input voltage:1Vp-p ± 3dB
Video input impedance:75Ohm
Vision carrier stability:± 500 Hz/Day
Amplitude vs. Frequency:0-5MHz  ± 0.5dB
Random spurious S/N: 50dB
Differential gain:7%
Differential phase: 5

Audio Characteristics
Audio input level:100mV
Audio input impedance  : unbalanced
Max. frequency deviation: ± 50KHz
Audio harmonic distortion:40Hz – 150Hz 2%
FM S/N: 60dB


Sample/Wholesale
Price
Shipping
Carrier
Buy it Now
1 pcs sample
1132 USD
/pcs
238 USD
DHL/UPS 7-10days

pcs
USD
/pcs
USD
Airmail 25days


This entry was posted in Products, TV Transmitters and tagged . Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *