Orban Optimod-FM 5500 Digital Audio Processor for Proffessional Radio Station


Sample/Wholesale
Price
Shipping
Carrier
Buy it Now
1 pcs sample
USD
/pcs
USD
Airmail 25days

pcs
USD
/pcs
USD
Airmail 25days


4521525872

OPTIMOD-FM 5500 will be five bands and two bands OPTIMOD handle set in a single rack unit package , and the best price available to you, instead of the OPTIMOD-FM5300 5500 and 2300 , to provide cooling to run in the new package two processors.

High quality is the 5500 ‘s advantage – no matter how the format and the source material , the audience can bring a beautiful , professional -quality results. Excellent versatility audio processor allows you to mediate texture to brand your sound you make signature sound produced on audio clips and always consistent . Branding can promote business development in OPTIMOD inhibitory aspects of your brand voice , the other processors can not match.

5500 can also be used independently of excellence stereo codec with low latency of 2ms , left / right , and composite band overshoot limit all domains . When used in this mode, the 5500 includes a pre -emphasis to be perceived by HF and peak limiting control fully functional FM audio processor ( e.g. ORBAN 8600 ) is driven ( typically by STL). In both modes , the stereo encoder 5500 and help clear the perfect limit the peak transmission signal regardless of the amount of the composite restrictions , has all the sub- carrier spectrum protection and RDS / RBDS.

5500 is used ORBAN Flagship OPTIMOD-FM8600 processing origin and broadcast in the network processor requires a transmitter to eliminate each STL overshoot ( using a separate stereo encoder 5500 Mode ) and / or processed locally inserted simultaneously ideal also eliminates network STL overshoots ( using 5500 audio processor / stereo encoder mode ) of the broadcasting company . In addition, any 5500 can be used as a stereo encoder with or without audio processing , making 5500 the two modes of government agencies and network broadcasters easier to manage their spare parts inventory .

In both modes , the built-in can be disabled ITU BS412 multiplex power controller , even the most stringent European government regulations, output 5500 can also be met.

5500 added a 10MHz frequency reference input enables stereo pilot tone frequency locked to the GPS or other high-precision frequency standard . This overlapping coverage area of the transmitter increases the frequency of a single network performance . Another new feature is the cooling operation and the use of energy-efficient switching power supply Freescale Semiconductor ‘s latest dual-core DSP chip technology .

Use 5500, your signature sound is just a preset sound. Easy single spin button to decrease / increase allows you to adjust based on market and competitive environment customize any factory preset , commercial cleaning products for processing . Full control allows you more flexible to customize your sound. If you are a backbone of treatment expert , you can plant programmers like ORBAN explore advanced controls to fine-tune the preset.

This versatility makes 5500 to become the optimal choice for any sound format. Its five -band processing for any pop music is ideal . Regardless of your choice, 5500 optimization techniques for a given level of subjective quality ensures significantly increase the average modulation and coverage.

Performance indicators ( for analog input to explain about the stereo mix output and FM analog output around ) :

Frequency response ( bypass mode ) : According to ± 0.10dB, 2.0Hz-15KHz standard 50μs or 75μs pre-emphasis arc running around the analog output and digital output can be user configured for flat or pre-emphasis output.

Noise: Noise baseline output gain settings based on the number of processors may be, according to the base processor output noise gain setting ( excitation limit , AGC excitation , dual-band excitation , and / or multi- band excitation ) , gate level , balanced noise reduction, and the like changed, and mainly by the dynamic range of a given band noise ratio of 110dB super negative a / D converter control , a dynamic range of the digital signal processing is 144dB,

System Distortion ( de-emphasized , 100% modulation ): <0.01% THD, 20Hz-1KHz, 15KHz rose when <0.05% <0.02% SMPTEIM distortion.

About the system frequency separation :> 50dB, 20Hz-15KHz; typical 60dB.

Polarization ( dual-band and bypass modes ) : maintain absolute polarity. Input port output port corresponding to the anode of the anode signal signal .

Sampling Frequency : 8300 is a multi- frequency system, internal frequency according to the processing needs from 32KHz to 512KHz.

Audio chopper operating frequency of 256KHz ( anti-aliasing ) . The composite limiter Vice operate in 512KHz.

Processing differentiate force : internal processes with 24bit ( point ) or higher resolution ; using Motorola DSP56362 DSP clipping.

Analog audio input

Configuration: Stereo

Impedance :> 10K ohm load impedance , electronically balanced .

Nominal input level : adjusted by software from -4.0 +13.0 dBu (VU).

Maximum input level : +27 dBu.

Connectors: Two XLR -type connector , negative , EMI control . Pin 1 lower plate line , pin 2 ( + ) , pin 3 electronically balanced , floating and symmetrical .

A / D Conversion: 24 bit 128x oversampled delta sigma phase anti-aliasing filter line resistor . The inverter output 64KHz sampling frequency, ultra-high quality 8300 with no images will be synchronized with the sampling frequency of the inverter DSP in abatement to 32KHz.

Filter : REI filtering with 0.15Hz (-3dB) high-pass filter

Analog audio output

Configuration: Stereo , unchanged , or pre-emphasis (50μs or 75μs) can be selected by software .

Sounds Impedance : 50 ohms, electronically balanced floating.

Load Impedance : 600 EU or higher. Balanced or unbalanced . Without terminal.

Output Level ( 100% peak modulation ) : Adjustable from -6dBu to +24 dBu peak , 600 ohms or higher load , through software control.

SNR :> = 90dB unweighted ( Bypass mode, de-emphasis ), 20Hz-15KHz bandwidth reference 100% adjustment

About Crosstalk : <= 70dB, 20Hz-15KHz.

Distortion : <= 0.01% THD ( Bypass mode, de-emphasis ), 20Hz-15KHz bandwidth.

Connectors: Two XLR -type, male , EMI suppression, Pin 1 chassis ground, pins 2 ( + ) , pin 3 electronically balanced , floating or and

D / A Conversion: 24 bit 128x oversampled , with 64KHz sampling frequency output .

Filtering : RFI filter

Digital audio input

Configuration : The AES / EBU standard stereo , 24-bit resolution, stereo software selection , from the left channel to mono , right channel to mono to mono or total tract .

Sampling frequency : automatic selection 32,44,1,48,88,2 , or 96KHz..

Connection : XLR -type, male , EMI suppressed. Pin 1 chassis ground, pins 2 and 3 transformer balanced and floating , 110 ohm impedance.

Input reference level : variable range in -30dBFS to -10dBFS.

J.17 de-emphasis : software selectable

Filtering : RFI filter

Digital Audio Output

Configuration : The AES / EBU standard stereo , software configured to output unchanged or increased pre-emphasis to the selected (50μs or

75μs) with or without J.17 pre-emphasis can be.

Sampling frequency : inside 32,, 44,1,48,88,1 or 96KHz free run through the software selection . When 32,44,1,48,88,1 or 96KHz can input synchronization with AES / EBU digital , or configured in software.

Word length : software selection 24,20,18,16 or 14 -bit resolution . Qualcomm may be increased noise type flutter wave , its level can be automatically adjusted according to the word length .

Connection : XLR -type, male , EMI suppressed. Pin 1 chassis ground, pins 2 and 3 transformer balanced and floating , 110 European and American impedance. Output Level ( 100% peak modulation ) : -20.0 to 0.0dBFS, software control.

Filtering : RFI filtering.

Safety Standards : ETL Standard UL certification system , CE standards

Dimensions : 48.3 × 4.8 × 36.2cm

Weight : 8.7KG


Sample/Wholesale
Price
Shipping
Carrier
Buy it Now
1 pcs sample
USD
/pcs
USD
Airmail 25days

pcs
USD
/pcs
USD
Airmail 25days


You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *